[讨论]ZEMAX非序列里能设置平面的不规则度吗 [复制链接]

各位大侠，我想模拟干涉仪，弄好光路后，发现平面的不规则度不知在哪里设置，比如λ/10的不规则度能模拟吗，或者有其他的软件能够模拟这个的教下我。。。

试试看用公差分析，能不能做。 tn5%zJ#+  
ZEMAX不能在设计中考虑表面不规则度的。

多谢这位大侠回答。。 D~C'1C&W  
看来真不能了，公差分析只是在序列里面，况且他只起分析作用，没感觉能具体模拟用的 (.4lsKN<  

二位大侠， $*0-+h  
我理解,zemax是可以完成的。我曾经在非序列中做过类似的分析模拟，及干涉图的回归重构再现。 m4/qxm"Dx:  
祝成功，多交流。 cB uuq  
^-"I
wy  

图片:flatness_interference.JPG

uPfz'|,  
/
yI4;:/  
\;&;K'   

膜拜，怎么弄的，版主大人

zemax中有个例子的,可以借鉴借鉴

下下来好好看看吧！

optifdtd 6?,qysm06  
不一样啊，例子里面是直条纹，楼主给的好像是粗糙度干涉条纹的样子、、、

There is a Zernike Sag surface in non-sequential mode, you may use it to represent the irregualr surface feature. Of course this would not be the same as the actual insertion of the real lens or surface as this surface has no thickness. If you could have some Zernike coefficient data (such as from Zygo) you may be able to implement the irregularity of the surface. i?B<&'G  
xlZh(pf  

hopebox:There is a Zernike Sag surface in non-sequential mode, you may use it to represent the irregualr surface feature. Of course this would not be the same as the actual insertion of the real lens or surface as this surface has no thickness. If you could have some  .. (2012-05-31 21:41)  N]8/l:@  

1grcCL q  
o~thank you very mach. i will try it according to your remind a%y*e+oM