[讨论]ZEMAX非序列里能设置平面的不规则度吗 [复制链接]

各位大侠，我想模拟干涉仪，弄好光路后，发现平面的不规则度不知在哪里设置，比如λ/10的不规则度能模拟吗，或者有其他的软件能够模拟这个的教下我。。。

有趣的問題~~

菲索干涉:[表情] optifdtd u[)_^kIE(n  
不一样啊，例子里面是直条纹，楼主给的好像是粗糙度干涉条纹的样子、、、 (2012-05-29 17:02)  ,ohmc\*J  

T-^0:@5o9  
Thank you

菲索干涉:
o~thank you very mach. i will try it according to your remind +Ofa#^5);K  
rEM#D]k  

LTXz$Z]  
怎么样，楼主的干涉仪搞定了么？

mang2004:二位大侠， .<YcSG  
我理解,zemax是可以完成的。我曾经在非序列中做过类似的分析模拟，及干涉图的回归重构再现。 v"!4JZ%K  
祝成功，多交流。
[图片] #{PmNx%M  
....... (2012-05-26 08:11)  BC77<R!E)  

J=H)JH3  
怎么模拟干涉？？牛逼啊。。。

hopebox:There is a Zernike Sag surface in non-sequential mode, you may use it to represent the irregualr surface feature. Of course this would not be the same as the actual insertion of the real lens or surface as this surface has no thickness. If you could have some  .. (2012-05-31 21:41)  K$[$4 dX]  

Q
[u6|jRt  
o~thank you very mach. i will try it according to your remind p]T"|!d  

There is a Zernike Sag surface in non-sequential mode, you may use it to represent the irregualr surface feature. Of course this would not be the same as the actual insertion of the real lens or surface as this surface has no thickness. If you could have some Zernike coefficient data (such as from Zygo) you may be able to implement the irregularity of the surface. U1R4x!ym4  
#"*e+.j[;  

optifdtd &2.u%[gO[q  
不一样啊，例子里面是直条纹，楼主给的好像是粗糙度干涉条纹的样子、、、

下下来好好看看吧！

zemax中有个例子的,可以借鉴借鉴