切换到宽版
  • 广告投放
  • 稿件投递
  • 繁體中文
    • 6237阅读
    • 5回复

    [讨论]有没有用CODEV设计成像光谱的朋友吗 [复制链接]

    上一主题 下一主题
    离线xueqs
     
    发帖
    2407
    光币
    0
    光券
    0
    只看楼主 倒序阅读 楼主  发表于: 2007-12-08
    有没有用CODEV设计成像光谱的朋友吗,可以交流一下,qshxue2006@163.com
    [ 此帖被linlin100在2011-02-23 10:43重新编辑 ]
     
    分享到
    离线mang2004
    发帖
    2409
    光币
    11231
    光券
    0
    只看该作者 1楼 发表于: 2007-12-11
    I did that several years ago fo medical application spectral instruments, using CodeV + Matlab for optics design and simulation.
    离线xueqs
    发帖
    2407
    光币
    0
    光券
    0
    只看该作者 2楼 发表于: 2008-03-27
    用Matlab模拟光谱吗
    离线mang2004
    发帖
    2409
    光币
    11231
    光券
    0
    只看该作者 3楼 发表于: 2008-03-31
    You are absolutely right. AH|gI2  
    <q8@a0e@  
    1,  Modelling optical system in codev and getting system response functions, using these functions in matlab to build input/output spectrum relationship( such as:  if input spectrum distribution is known, matlab does convolution to predict the output,... ); @^xtxtjzux  
    By the way, right now 9.7/9.8 provides diffraction imaging function, probably it can perform the same.    ]QhTxrF"  
    yEq7ueJ'  
    2,  Further more,  OE detector and electronics being modeled in matlab to simulate whole system, like saturation, dynamic, SNR, frequency response, even thermal & mechanical variation. F}5d>nw  
    s{-gsSmE  
    3,  At that time(back to 2001), non-sequencial optics softwares were not available for me --- had to use codev+matlab to do straylight and illumination efficiency design. fC[za,PXaE  
    b~J)LXj]w  
    Hope above are helpful. d=/0A\O  
         
    离线xueqs
    发帖
    2407
    光币
    0
    光券
    0
    只看该作者 4楼 发表于: 2008-04-11
    谢谢mang2004,希望多交流,qshxue2006@163.com
    离线lw613315
    发帖
    123
    光币
    1
    光券
    0
    只看该作者 5楼 发表于: 2013-06-19
    CODEV 学习比较难啊!