切换到宽版
  • 广告投放
  • 稿件投递
  • 繁體中文
    • 2913阅读
    • 2回复

    [求助]telecentricity error [复制链接]

    上一主题 下一主题
    离线miraclelight
     
    发帖
    13
    光币
    16
    光券
    0
    只看楼主 倒序阅读 楼主  发表于: 2014-10-29
    大家好! 请问Zemax能算 telecentricity error 吗?能画出telecentricity error vs. depth of focus 的图吗?
     
    分享到
    离线hopebox
    发帖
    484
    光币
    332
    光券
    0
    只看该作者 1楼 发表于: 2014-10-29
    You may use the operand RAED to measure how telecentric the system is. If you know the depth of the focus for each field, you can make use of Universal Plot, bascially plotting RAED v.s the change of thickness (the range of the depth of focus). This can be only for one field at time. KdB9Q ;  
    !u=,bfyH  
    If I understand your question correctly then this should help. L=WB'*N  
    koAM",5D  
    离线miraclelight
    发帖
    13
    光币
    16
    光券
    0
    只看该作者 2楼 发表于: 2014-11-12
    Thank you so much for your help!  I plotted RAED and RAID vs. the image plane position.  I noticed that for different wavelengths, the chief ray angles (RAED or RAID values) don't change much. I have a broadband objective, and I think the angles should be quite different.  How does Zemax calculate RAID or RAED? lm;G8IP`  
    {<3>^ o|"  
    Also, how should I obtain the centroid-based telecentricity error with Zemax?  Is there another Zemax operand for the centroid-based telecentricity error?