蕴藉之身:没有NSDD的说明哦
(2013-05-16 17:07) 
2B^~/T<\
8x9Rm Non-sequential incoherent intensity data. Surf defines the surface number of the NSC group
>9=:sSQu (always 1 in pure NSC systems). Det# refers to the object number of the desired detector. If Det#
;1v=||V is zero, then all detectors are cleared. If Det# is less than zero, then the detector defined by the
+P|2m"UA absolute value of Det# only is cleared.
be7L="vZw For Detector Rectangles, Detector Surfaces, and all faceted detectors: If Pix# is a positive integer
IV0[! D greater than zero, then the data from the specified pixel is returned. Otherwise, the following data
X(]Zr is returned depending upon the value of Pix#:
I:i<>kG 0: Sum of the total flux in position space, average flux/area in position space, or total flux in angle
B| tzF0;c space for all pixels for that detector object, for Data = 0, 1, or 2, respectively.
?4 qkDtm -1: Maximum flux or flux/area.
L P9)zi -2: Minimum flux or flux/area.
~b Rd)1 -3: Number of rays striking the detector.
1Y#H cW& -4: Standard deviation (RMS from the mean) of all the non-zero pixel data.
l4KbTKm7 -5: The mean value of all the non-zero pixel data.
r'p =` 2= -6, -7, -8: The x, y, or z coordinate of the position or angle Irradiance or Intensity centroid,
c`
,
2h# respectively.
'<7S^^ax -9,-10, -11, -12: The RMS radius, x, y, or z distance or angle of all the pixel data with respect to the
Q[uAIyv0 centroid.
qgx?"$ Z
Data is 0 for flux, 1 for flux/area, and 2 for flux/solid angle pixel. Only values 0 and 1 (for flux and
>Q=Ukn;k flux/area) are supported for faceted detectors. See “Optimizing with sources and detectors in nonsequential
W5.Va . mode” on page 502 for complete details.
