切换到宽版
  • 广告投放
  • 稿件投递
  • 繁體中文
    • 4193阅读
    • 13回复

    [求助]请问zemax建模中的衍射 [复制链接]

    上一主题 下一主题
    离线jerri
     
    发帖
    354
    光币
    6
    光券
    0
    只看楼主 正序阅读 楼主  发表于: 2012-07-09
    各位DXJM zL7+HY* 3o  
    请问zemax09建模观察成像光场,能不能忽略衍射效应?如何设置 gbSZ- ej  
    谢谢
     
    分享到
    离线vivi2009wu
    发帖
    335
    光币
    350
    光券
    0
    只看该作者 13楼 发表于: 2013-02-22
    楼上的回答好搞笑, i [FBll-  
    非序列模式不考虑衍射,除非你使用某种设置,可能起作用,例如干涉,但是仅受限于探测器,否则NSC模式仅适用几何光线,你不用担心这个。 M6g!bK2l  
    离线kaigeyx
    发帖
    92
    光币
    4
    光券
    0
    只看该作者 12楼 发表于: 2013-02-01
    non-sequential mode does not account diffraction unless you use certain setting that may wrok out something such as interference but this is resctricted at the detector objects,otherwise this mode will just use geometric rays. You should not have to worry about it.   f? ko%c_p  
    XhTp'2,]  
    Under detector, you shall just use incoherent data. 翻译一下吧?有人吗?
    离线张雪冰
    发帖
    42
    光币
    4
    光券
    0
    只看该作者 11楼 发表于: 2012-11-18
    还没有学到啊
    离线licc
    发帖
    280
    光币
    74
    光券
    0
    只看该作者 10楼 发表于: 2012-10-27
    不明白
    离线默默
    发帖
    6
    光币
    2
    光券
    0
    只看该作者 9楼 发表于: 2012-07-27
    这个也是我想要知道的问题,帮忙顶一下
    离线hopebox
    发帖
    484
    光币
    332
    光券
    0
    只看该作者 8楼 发表于: 2012-07-16
    non-sequential mode does not account diffraction unless you use certain setting that may wrok out something such as interference but this is resctricted at the detector objects,otherwise this mode will just use geometric rays. You should not have to worry about it. !.x(lOqf  
    &Zq43~  
    Under detector, you shall just use incoherent data. WG(tt.  
    A1Rt  
    离线jerri
    发帖
    354
    光币
    6
    光券
    0
    只看该作者 7楼 发表于: 2012-07-10
    anaysis 里面没有diffraction啊
    离线johnyq
    发帖
    151
    光币
    419
    光券
    0
    只看该作者 6楼 发表于: 2012-07-10
    anaysis  ——diffraction
    离线jerri
    发帖
    354
    光币
    6
    光券
    0
    只看该作者 5楼 发表于: 2012-07-10
    自己顶一下