[求助]請教Zemax中Angle超過180度(超魚眼Lens)的設定方法? [复制链接]

最近在設計超魚眼鏡頭,view angle 超過180度,在Zemax設定中會發生角度全反射的問題,請教各位先進,該如何解決呢? ohOze\T)=  
]&jXD=a"  
Lens1:  Red光為200 deg ; Green光為180度. bR(rZu5  

图片:lens1.JPG

ZU5hHah.t  
7&qunK'  
Lens2:Red光為200 deg ; Green光為180度;物距=infinity.   _}8O15B|  

图片:Lens2.JPG

create a dummy surface before the first lens surface and assign it a radius similar to the radius of the first lens surface and you should ge the rays from 100 half field of view display properly. i think you system design is a bit similar to  the example file, Wide angle lens 200 degree field.zmx in ZEMAX. If so I think there is a dummy surface already. Just change radius of the dummy surface shall put you right. g:7S/L0]  
qk<(iVUO  
What you see in your second diagram is not TIR but the result od sequential ray tracing!! : )

能把这数据给发我吗，谢谢，非商业用途，学生，QQ474240964