[讨论]zemax菲涅耳透镜设计 [复制链接]

zemax设计菲涅耳透镜时，  fresnel1参数中+Depth/-Freq、Radius、conic分别指什么？

Allow me to repost  here for depth/frequency setting LSS3(l[,:  
The main fresnel lens types are: q4C$-W%rj  
sFqZ@t}~  
    * Constant groove depth. "hdcB 0  
    * Contant groove pitch types. 18jI6$DY  
P33x/#VVE  
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. aOFF"(]Cl  
L&H4fy!>  
For radius, this is the curvature of the base surface. If you define one such lens and chaneg the radius and you shall see what it means. A graphic tells lounder than words. (hEqh nnm`  
HZ* <BjE:"  
For conic: check conic section using Wikipedia and you should see what conic constant means. 7g^=   
Pfj{TT.#L  
`}Ssc-A  

Thanks very much!

hopebox确实无处不在啊，能不能加你qq？

Thanks very much

hopebox真的是无处不在