Allow me to repost here for depth/frequency setting 8pXului
The main fresnel lens types are: \8^c"%v,:
0FAe5
BE7
* Constant groove depth. ;z1\n 3,
* Contant groove pitch types. Mn<#rBE B
Ss~yy0
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. ;h ~v,h
c0U=Hj@@
For radius, this is the curvature of the base surface. If you define one such lens and chaneg the radius and you shall see what it means. A graphic tells lounder than words. rYI7V?
F 1A7l"X]
For conic: check conic section using Wikipedia and you should see what conic constant means. "?HDv WP=w
%G`GdG}T
|& Pa`=sp
