切换到宽版
  • 广告投放
  • 稿件投递
  • 繁體中文
    • 5376阅读
    • 1回复

    [求助]这个问题怎么回事? [复制链接]

    上一主题 下一主题
    离线xylrs
     
    发帖
    34
    光币
    155
    光券
    0
    只看楼主 正序阅读 楼主  发表于: 2006-12-11
    提示: q7z`oK5  
    Warning: Invalid geometry! Negative edge count! \!LIqqX  
       TracePro can continue only by removing this object from the raytrace. (vP<}  
       Object: Object 2 has been removed from the raytrace. *T6*Nxs0k  
       This object must be replaced with valid geometry for inclusion in the raytrace. @cB7tY*Ski  
    n f.H0i;  
    sGFvSW  
    建模的时候没有问题啊,为什么还会出现这样的情况呢?
     
    分享到
    离线1210
    发帖
    39
    光币
    47
    光券
    0
    只看该作者 1楼 发表于: 2006-12-11
    检查一下Object 2,模型有些问题。