切换到宽版
  • 广告投放
  • 稿件投递
  • 繁體中文
    • 3080阅读
    • 3回复

    [原创]关于畸变 [复制链接]

    上一主题 下一主题
    离线rzyp
     
    发帖
    427
    光币
    51
    光券
    0
    只看楼主 倒序阅读 楼主  发表于: 2012-08-15
    在zemax中,实际像高是不是REAY和REAX的平方和在开方啊,我是这样编写的,但是感觉不对请指点,设置REAY时把Hy=1,REAZ时Hx=1.下面是截图请不吝赐教
     
    分享到
    离线hopebox
    发帖
    484
    光币
    332
    光券
    0
    只看该作者 1楼 发表于: 2012-08-15
    If the system is rotationally symmetric, you could just refer to either REAY or REAX. If you check Field Curvature/Distortion curve text version, you can compare these results. The text version also tell you the reference ray height. /5Vv5d/Z4!  
    9MQjSNYzo  
    离线李锦艳
    发帖
    296
    光币
    2083
    光券
    0
    只看该作者 2楼 发表于: 2012-08-17
    回 hopebox 的帖子
    hopebox:If the system is rotationally symmetric, you could just refer to either REAY or REAX. If you check Field Curvature/Distortion curve text version, you can compare these results. The text version also tell you the reference ray height.
     (2012-08-15 21:53)  <"xqt7f  
    !IB}&m  
    如果是旋转对称系统,你可以仅参考reax或reay。如果要看场曲或畸变,则可以对比场曲和畸变图表中的text数据,在数剧中,有对应的像高和场曲/畸变值。
    离线gangjiyiqu
    发帖
    1039
    光币
    19
    光券
    0
    只看该作者 3楼 发表于: 2014-06-11
    回 hopebox 的帖子
    hopebox:If the system is rotationally symmetric, you could just refer to either REAY or REAX. If you check Field Curvature/Distortion curve text version, you can compare these results. The text version also tell you the reference ray height.
     (2012-08-15 21:53)  O, :|  
    /BvMNKb$$  
    切中主题,谢谢