[求助]求CODEV中MTF图线不能显示的原因 [复制链接]

小弟用CODEV设计了一个开普勒望远镜。目镜用的是对称式，物镜用了一个双胶合，视觉放大率为12。 c'3N;sZ*B  
在目镜和物镜分别优化之后，将二者组合在一起时发现Quick 2D能正常显示，但是MTF图线无法显示，有报错，如下： K,! V _  
Warning: At least 3 focal positions are recommended for finding best focus Q~0>GOq*  
Warning: This system is not isoplanatic at field(s)  1, 2, 3, 4. T\$i=,_$  
               Any MTF results are of questionable value for assessing _4)z:?G5  
               the image quality, except in those cases where the user is R3a}YwJFXF  
               interested only in the image of a point-like object.  The <B0f  
               image quality for the unacceptable fields varies significan- lqMr@ :t  
               tly over a lateral region of 12 Airy disk diameters. rq!
*unJ  
Warning: The MTF results at one or more fields are inaccurate. BK=w'1U  
               The mapping between entrance pupil coordinates and exit pupil coordinates $Z;/Sh  
               is nonlinear.  The nature of the nonlinearity is such that Code V is not 2IM31 .  
               able to compute an accurate MTF result.  Usually, this condition is :8oJG8WH  
               caused by severe pupil distortion or some discontinuity in the pupil %c\kLSe  
               coordinate mapping.  In all cases where the pupil coordinate mapping WG6 0  
               has sufficient nonlinearity to cause this warning, the imagery is extremely gELG/6l  
               nonstationary (non-isoplanatic) and small changes in object space KgkRs?'z  
               coordinates will cause large changes in the image of a point source. {]}94T~/k  
Error: The problem described here occurs at the following field(s): ZfqN4  
                           Field:  1 [yk-<}#B  
                           Field:  2 I_z(ft
.  
                           Field:  3 3BCD0 %8  
                           Field:  4 pk.\IKlG]  
     ERROR - For  field  4, wavelength  1, rays at the edge of the pupil 7pY :.iVO  
             may be ignored. Check apertures and vignetting for consistency. RQo a  
这个究竟是什么问题呢？好像是和视场有关。求高人指点。

1、是无焦模式吗？ v '+]T=  
2、MTF最大设置成多少了？一般无焦的到2已经很NB了。具体不讲了，多看看CODE V相关的资料

我是初学，把镜头数据输入后，得到的结果和楼主一样，无法做出mtf。

望远镜设计是要无焦的吧?MTF设置了40,但是物镜和目镜分别优化时都是没问题的啊

设置成无焦模式后，把mtf的最大值改成1，具体原因求哥们好好学习，个人能力有限，怕解释不清楚

多谢指点，虽然不知道为什么，但是图线出来了。

非常好的，谢谢

学习 学习！

系统没有衔接好，看看na epd等

codev初学，学习了