[求助]請教Zemax中Angle超過180度(超魚眼Lens)的設定方法? [复制链接]

最近在設計超魚眼鏡頭,view angle 超過180度,在Zemax設定中會發生角度全反射的問題,請教各位先進,該如何解決呢? =h
lu, By  
aC` c^'5  
Lens1:  Red光為200 deg ; Green光為180度. %tLq&tyeY  

图片:lens1.JPG

TR20{8"  
_J!mhUA  
Lens2:Red光為200 deg ; Green光為180度;物距=infinity.   .9QQ]fLs  

图片:Lens2.JPG

create a dummy surface before the first lens surface and assign it a radius similar to the radius of the first lens surface and you should ge the rays from 100 half field of view display properly. i think you system design is a bit similar to  the example file, Wide angle lens 200 degree field.zmx in ZEMAX. If so I think there is a dummy surface already. Just change radius of the dummy surface shall put you right. .|-y+9IP  
3\7$)p+c  
What you see in your second diagram is not TIR but the result od sequential ray tracing!! : )

能把这数据给发我吗，谢谢，非商业用途，学生，QQ474240964