切换到宽版
  • 广告投放
  • 稿件投递
  • 繁體中文
    • ZEMAX光学系统设计实战 Zemax光学设计从基础到实践 成像衍射光学元件设计及应用 现代光学与光子学技术
    讯技光电:VirtualLab Fusion独家供应商 微小光学与微透镜阵列 光学设计与光学元件 计算光学带来的成像革命
    发帖 回复
    返回列表
    • 2069阅读
    • 1回复

    [原创]SYNOPSYS™15.51 版本发布 [复制链接]

    		 上一主题 下一主题
    离线optics1210
    助理工程师
     
    发帖
    476
    光币
    317
    光券
    0
    只看楼主 倒序阅读 楼主  发表于: 2019-01-18
    The update to version 15.51 incorporates the following changes: ^xB=d S~  
    3&'u7e  
    Features: Y|NL #F  
    1.  DSEARCH now has a FILTER directive, which lets you specify that certain elements should be either positive or negative, while the others can be either.  If you know what a portion of your lens should look like, you can specify it this way -- and shorten the search time by a factor of two for each element so declared. v5aHe_?lp  
    2.  SYNOPSYS now has a STEP file converter.  There are limitations, however, which you can read about in the UM. ]<9KX} B  
    _trF/U<  
    Bugs Fixed: ,5tW|=0@  
    1.  The sequence IFR ... / IFP ... did not work if COMMON was requested. ,-55*Rbi  
    2.  ARG did not work properly with plastic elements. epWTZV(1x  
    3.  Index values varied with GLM did not let the value of Nd rise above 1.9, even if you specified a higher limit with the CUL and FUL directives. zcn> 4E)  
    [ 此帖被optics1210在2019-01-20 11:31重新编辑 ]
     
    回复
    举报
    分享到
    离线optics1210
    助理工程师
    发帖
    476
    光币
    317
    光券
    0
    只看该作者 1楼 发表于: 2019-01-20
    每一个新版可以实时加入客户要求的功能，反馈过程大约24小时左右，加入功能从一周到几周不等。
    回复
    举报
    发帖 回复
    返回列表