首页 -> 登录 -> 注册 -> 回复主题 -> 发表主题
光行天下 -> ZEMAX,OpticStudio -> 用ZEMAX计算光纤的耦合效率 [点此返回论坛查看本帖完整版本] [打印本页]

qlmi 2006-07-06 20:23

用ZEMAX计算光纤的耦合效率

我用ZEMAX计算光纤的耦合效率,可是我发现当接收光纤的数值孔径增大时耦合效率反而降低了,这是怎么回事呢?
libo_wii 2006-07-07 15:16
我也想知道,同问,呵呵
r18xxl 2006-07-10 13:52
我是新手也想知道对于光耦合的问题
cy_dragon 2006-07-13 13:43
有没有这方面的书籍?
kinangel 2007-04-28 00:52
我也想知道 [s:3]
getplmm32 2007-05-09 18:51
System Efficiency              :      0.999138 i]-gO  
IX*S:7S[  
Receiver Efficiency            :      0.945327 ]6;AK\9TM  
h]MVFn{  
Coupling Efficiency            :      0.944512 (-0.2479 dB)  ke#;1  
.fsk DW  
Maximum Efficiency              :      0.995227 )ra66E  
Ntn md  
The system efficiency is the fraction of the energy in the source QBw ZfX  
beam that exits the optical system. This value is determined by cGc|n3(  
the input na, entrance pupil size and position, apodization, HV9SdJOf  
transmission of the optics, and vignetting. ,?`1ve_K<  
f0`' i[  
The receiver efficiency is the fraction of the transmitted energy U>+~.|'V9  
that couples from the exit pupil to the receiving fiber. This huoKr  
value is determined by aberrations and the na of the receiving fiber. q-G|@6O  
U&n>fXTHn  
The coupling efficiency is the fraction of energy radiated WhZaq  
by the source that couples into the receiver. This is the c9 uT`h  
product of the system and receiver efficiencies. $ tNhwF  
e] K=Nm  
The maximum efficiency is the coupling efficiency if there 8T)zB6ng  
were no aberrations. k2uiu  
9xQ 8`7  
数值孔径不是越大越好呀,当耦合光学系统的模式与你光线的模式完全匹配时,耦合效率最大. =[K)<5,@  
耦合效率的计算有一个积分过程,还是比较复杂的.
chx.ciomp 2010-06-11 10:29
            
御风全 2011-03-26 16:05
能否请问五楼的大侠怎么做到的,谢谢啊~~335797507@qq.com
ydm2626 2011-12-07 20:58
谢谢  学学
韩笑1234 2012-04-06 16:17
我也想知道
oscarli 2019-11-15 00:15
我也想知道,同问
tkdxx 2019-12-01 11:51
模场分布约接近,耦合效率越高,跟NA无关
查看本帖完整版本: [-- 用ZEMAX计算光纤的耦合效率 --] [-- top --]

Copyright © 2005-2025 光行天下 蜀ICP备06003254号-1 网站统计