关于畸变-ZEMAX,OpticStudio-光行天下-最大的光电技术社区-光学,光电,光机技术及其软件运用交流社区!

首页 -> 登录 -> 注册 -> 回复主题 -> 发表主题

光行天下 -> ZEMAX,OpticStudio -> 关于畸变 [点此返回论坛查看本帖完整版本]

[打印本页]

rzyp	2012-08-15 09:45
关于畸变在zemax中，实际像高是不是REAY和REAX的平方和在开方啊，我是这样编写的，但是感觉不对请指点，设置REAY时把Hy=1，REAZ时Hx=1.下面是截图请不吝赐教

hopebox	2012-08-15 21:53
If the system is rotationally symmetric, you could just refer to either REAY or REAX. If you check Field Curvature/Distortion curve text version, you can compare these results. The text version also tell you the reference ray height. ;DFSzbF` um!J]N^

李锦艳

2012-08-17 11:31

hopebox:If the system is rotationally symmetric, you could just refer to either REAY or REAX. If you check Field Curvature/Distortion curve text version, you can compare these results. The text version also tell you the reference ray height. v1o#1;
(2012-08-15 21:53) ,J,/."Y

如果是旋转对称系统，你可以仅参考reax或reay。如果要看场曲或畸变，则可以对比场曲和畸变图表中的text数据，在数剧中，有对应的像高和场曲/畸变值。

gangjiyiqu	2014-06-11 09:10
hopebox:If the system is rotationally symmetric, you could just refer to either REAY or REAX. If you check Field Curvature/Distortion curve text version, you can compare these results. The text version also tell you the reference ray height. 7mI:\|G (2012-08-15 21:53) tNO-e\|~' +o\:d1y 切中主题，谢谢

查看本帖完整版本: [-- 关于畸变 --] [-- top --]