首页 -> 登录 -> 注册 -> 回复主题 -> 发表主题
光行天下 -> ZEMAX,OpticStudio -> 请问zemax建模中的衍射 [点此返回论坛查看本帖完整版本] [打印本页]

jerri 2012-07-09 14:57

请问zemax建模中的衍射

各位DXJM ^Gbcs l~Gj  
请问zemax09建模观察成像光场，能不能忽略衍射效应？如何设置 G{pF! q  
谢谢
karas888 2012-07-09 15:50
感謝 思考中 =H-BsX?P  
hopebox 2012-07-09 20:15
Are you talking about "Geometric" Image Analysis? This tool purely uses geometric rays alone.
netwb2010ms 2012-07-10 09:03
没人回答吗
jerri 2012-07-10 09:43
非序列模式中
jerri 2012-07-10 13:52
自己顶一下
johnyq 2012-07-10 14:27
anaysis  ——diffraction
jerri 2012-07-10 15:52
anaysis 里面没有diffraction啊
hopebox 2012-07-16 23:28
non-sequential mode does not account diffraction unless you use certain setting that may wrok out something such as interference but this is resctricted at the detector objects,otherwise this mode will just use geometric rays. You should not have to worry about it. cor!Sa>  
DBfq9%J _  
Under detector, you shall just use incoherent data. 9nd,8Nji  
=?M{B1;H  
默默 2012-07-27 19:25
这个也是我想要知道的问题，帮忙顶一下
licc 2012-10-27 00:16
不明白
张雪冰 2012-11-18 15:33
还没有学到啊
kaigeyx 2013-02-01 23:32
non-sequential mode does not account diffraction unless you use certain setting that may wrok out something such as interference but this is resctricted at the detector objects,otherwise this mode will just use geometric rays. You should not have to worry about it.   5p.#nc!;y  
_y[B/C,q  
Under detector, you shall just use incoherent data. 翻译一下吧？有人吗？
vivi2009wu 2013-02-22 15:07
楼上的回答好搞笑， Q:b>1  
非序列模式不考虑衍射，除非你使用某种设置，可能起作用，例如干涉，但是仅受限于探测器，否则NSC模式仅适用几何光线，你不用担心这个。 V[* <^%  
查看本帖完整版本: [-- 请问zemax建模中的衍射 --] [-- top --]

Copyright © 2005-2024 光行天下 蜀ICP备06003254号-1 网站统计