首页 -> 登录 -> 注册 -> 回复主题 -> 发表主题
光行天下 -> ZEMAX,OpticStudio -> 請教Zemax中Angle超過180度(超魚眼Lens)的設定方法? [点此返回论坛查看本帖完整版本] [打印本页]

yungjye 2010-08-21 22:08

請教Zemax中Angle超過180度(超魚眼Lens)的設定方法?

最近在設計超魚眼鏡頭,view angle 超過180度,在Zemax設定中會發生角度全反射的問題,請教各位先進,該如何解決呢? ]ri5mnB  
u $O` \=  
Lens1:  Red光為200 deg ; Green光為180度. C8W#$a  
[attachment=28673] *j6K QZ"  
H Rn Q*  
Lens2:Red光為200 deg ; Green光為180度;物距=infinity.   x-1RmL_%  
[attachment=28674]
hopebox 2010-08-23 04:56
create a dummy surface before the first lens surface and assign it a radius similar to the radius of the first lens surface and you should ge the rays from 100 half field of view display properly. i think you system design is a bit similar to  the example file, Wide angle lens 200 degree field.zmx in ZEMAX. If so I think there is a dummy surface already. Just change radius of the dummy surface shall put you right. g(& huS  
q!iS Y  
What you see in your second diagram is not TIR but the result od sequential ray tracing!! : )
cxg0816 2011-11-09 15:40
能把这数据给发我吗，谢谢，非商业用途，学生，QQ474240964
查看本帖完整版本: [-- 請教Zemax中Angle超過180度(超魚眼Lens)的設定方法? --] [-- top --]

Copyright © 2005-2026 光行天下 蜀ICP备06003254号-1 网站统计