向量vectors设置问题，不清楚如何设置Normal and Up Vectors，你可以在Irradiance/Illuminance Options中选中"Automatically calculate Normal and Up Vectors”。 :fUNc^\2 79D;0 另外，分析图的颜色和项目也可以在Irradiance/Illuminance Options中设置。
huangshang
2008-06-22 21:21
多谢站长!!! 图像已经调的差不多了, 但还是不完全相同, 摸索中, 呵呵!!!
cyqdesign
2008-06-22 21:33
主要就是Irradiance/Illuminance Options设置差异。
灵魂
2008-06-22 21:53
在tracepro中设置面属性时，发现没有Ag这种属性，有没有办法把这种属性导进去呢 QW WI 求救
站长说的很对，补充一下： oHF ,k Normal Vector d_ &~^*> The Normal Vector is a vector in 3D space that is used to orient the projection |-%dN }O plane for the irradiance map. The plane is defined to be perpendicular to the )Q<u0AxAn Normal Vector, and the irradiance incident on the selected surface is projected #8%~ u+"N onto this plane. When the map is displayed, the normal vector is pointing toward R[#B|$ you. Shss};QZf( Up Vector } _Y \6fcd The Up Vector is a vector in 3D space that is used to orient the projection plane oJc7a z for the irradiance map. The plane is defined so that the Up Vector is parallel to the aCyn9Y$= vertical side of the plane. The irradiance incident on the selected surface is dd@
D
s projected onto this plane. When the map is displayed, the up vector will point KPZqPtb; toward the top of the screen.