这个是麦克劳德帮助文件里的说明：Dynamic Tooling Factor: Reset for each Layer when cleared and the tooling factor is read from a table file then the tooling factor will be a function of the accumulating thickness of layers of the appropriate source. This simulates the gradual depletion of material from the source as coating deposition proceeds. There may be circumstances where the tooling factor should be a function of the individual layer thickness only. This will be selected when the box is checked. Then the accumulated thickness is set to zero at the start of each layer. This option applied only if tooling factor tables are in use. ~|pVz/s|G xue-5 ' 大意是说：用来模拟镀膜过程中材料损耗造成的影响。
cgw808670
2022-02-27 22:22
外语对我来说，真难
与日月兮齐光
2022-03-10 09:01
ouyuu:这个是麦克劳德帮助文件里的说明：Dynamic Tooling Factor: Reset for each Layer when cleared and the tooling factor is read from a table file then the tooling factor will be a function of the accumulating thickness of layers of the appropriate source. This simula .. (2022-02-23 19:37) &{x5 |$SD
，谢谢啦